in-service (RFC2544 Benchmarking)
Syntax in-service;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 14.2 for MX104 3D Universal Edge routers.
Description Runs the test in the in-service mode. In this mode, while the test is running, the rest of
the data traffic sent to and from the UNI port under test on the service are not interrupted.
Control protocol packets and control protocol peering are not interrupted.
If this mode is not configured, the test runs in the default out-of-service mode. In the
out-of-service mode, while the test is running, all the data traffic sent to and from the
UNI port under test on the service is interrupted. Control protocol peering is not interrupted
whereas control protocol packets such as CFM sessions are interrupted.
Default The default service mode for the reflecting egress interface for an E-LAN service is
out-of-service mode.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• rfc2544-benchmarking on page 1698
• RFC2544-Based Benchmarking Tests Overview
• Configuring an RFC 2544-Based Benchmarking Test
Copyright © 2017, Juniper Networks, Inc.1568
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
