delegation-priority
Syntax delegation-priority priority-number;
Hierarchy Level [edit protocols pcep pce pce-id]
Release Information Statement introduced in Junos OS Release 12.3.
Support for PTX Series added in Junos OS Release 14.2.
Support for QFX10000 switches added in Junos OS Release 16.1R3.
Support for ACX Series added in Junos OS Release 17.1R1.
Description Specify the priority number of the active stateful Path Computation Element (PCE). This
value is used by the Path Computation Client (PCC) to elect a PCE to delegate LSPs. No
two PCEs can have the same delegation-priority value. The PCC elects the PCE with a
lower priority as the main active stateful PCE to delegate LSPs.
Options priority-number—Priority number of the active stateful PCE.
Range: 1 through 65535
Default: 0 (no priority is set)
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• pce on page 1655
1477Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
