Name: Juniper ACX2000
Brand: Juniper
Rating: 4 (1 reviews)

To Next Page

To Previous Page

test-iterator-duration (RFC 2544 Benchmarking)

Syntax test-iterator-duration seconds;

Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]

Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.

Description Specify the duration of each iteration in seconds. If you configure this value, the default

value of each iteration depends on the type of test being run. For throughput,

back-back-frames and frame-loss types of tests, the default value is 20 seconds. For

latency tests, the default value is 120 seconds.

Options seconds—Number of seconds for which each test iteration is run.

Range: 10 through 120 seconds

Required Privilege

Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Documentation

• RFC 2544-Based Benchmarking Tests Overview on page 1335

• Configuring RFC 2544-Based Benchmarking Tests on page 1341

• rfc2544-benchmarking on page 1698

test-iterator-pass-threshold (RFC 2544 Benchmarking)

Syntax test-iterator-pass-threshold;