show oam ethernet connectivity-fault-management server-mep
Syntax show oam ethernet connectivity-fault-management server-mep
<server-mep-id>
<brief | detail | extensive>
Release Information Command introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description On the ACX Series routers, display the server maintenance association end points (MEPs)
created in the system.
Options brief | detail | extensive—(Optional) Specified level of output.
server-mep-id—Information of a server MEP.
Required Privilege
Level
View
Output Fields Table 183 on page 2810 lists the output fields for the show oam ethernet
connectivity-fault-management server-mep command. Output fields are listed in the
approximate order in which they appear.
Table 183: show oam ethernet connectivity-fault-management server-mep Output Fields
Field DescriptionField Name
Identifier of the server MEP and the status <Up/Down>..MEP identifier
Protocols information (l2circuit/l2vpn/ethernet)Protocol
Interface name, interface status and link status information.Interface name
ETH-AIS status, interval, domain level, and priority information.Ethernet-ais status
Name of the action profile.Action profile
Sample Output
show oam ethernet connectivity-fault-management server-mep
user@host> show oam ethernet connectivity-fault-management server-mep 1000
MEP identifier: 1000, Status: up
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: down, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
Copyright © 2017, Juniper Networks, Inc.2810
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
