Juniper ACX2000 Configuration Guide

Table 29: IMA Group Alarms with IMA Standard Requirement Numbers (continued)
IMA Standard Requirement NumberAlarm
R-151Timing-Mismatch
Blocked
Version-Mismatch
Table 30 on page 178 shows the supported IMA group defects and their associated IMA
standard requirement numbers. This is displayed in the group status and control field of
an ICP cell.
Table 30: IMA Group Defects with IMA Standard Requirement Numbers
IMA Standard Requirement NumberDefects
R-145Start-up-FE
R-146Config-Aborted
R-147Config-Aborted-FE
R-148Insufficient-Links
R-149Insufficient-Links-FE
R-150Blocked-FE
R-151Timing-Mismatch
Blocked
Version-Mismatch
IMA Link Alarms and Link Defects
Table 31 on page 178 shows the supported IMA link alarms that are reported to the IMA
unit management with their associated IMA standard requirement numbers.
Table 31: IMA Link Alarms with IMA Standard Requirement Numbers
Description
IMA Standard Requirement
NumberAlarm
Loss of IMA frameR-138LIF
Link out of delay synchronizationR-139LODS
Remote defect/failureR-140RFI-IMA
Copyright © 2017, Juniper Networks, Inc.178
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English