sync-interval (Master)
Syntax sync-interval sync-interval;
Hierarchy Level [edit protocols ptp master]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the log mean interval between synchronization messages.
Specify the log mean interval between synchronization messages, which are sent from
the master to the slave or clock client. This is a log
2
value, which means that
synchronization messages default to being sent every 1/64
th
of a second for a rate of 64
packets per second.
Options sync-interval—Acceptable interval between synchronization messages.
Range: -7 to 4
Default: -6
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
Copyright © 2017, Juniper Networks, Inc.1738
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
