Juniper ACX2000

destination (Interfaces)
Syntax destination address;
Hierarchy Level [edit interfaces interface-name unit logical-unit-number tunnel],
[edit interfaces interface-name unit logical-unit-number family inet address address],
[edit interfaces interface-name unit logical-unit-number tunnel],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address]
Release Information Statement introduced before Junos OS Release 7.4.
Description For CoS on ATM interfaces, specify the remote address of the connection.
For point-to-point interfaces only, specify the address of the interface at the remote end
of the connection.
For tunnel and encryption interfaces, specify the remote address of the tunnel.
Options address—Address of the remote side of the connection.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Linear RED Profiles on ATM Interfaces
• Multilink and Link Services Logical Interface Configuration Overview
• Configuring Encryption Interfaces
• Configuring Traffic Sampling
• Configuring Flow Monitoring
• Configuring Unicast Tunnels
1479Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements