show lldp neighbors
Syntax show lldp neighbors
<interface interface-name>
Release Information Command introduced in Junos OS Release 9.6.
Description Display information about LLDP neighbors.
For information about interface names, see Interface Naming Overview. For information
about interface names for TX Matrix routers, see TX Matrix Router Chassis and Interface
Names. For information about FPC numbering on TX Matrix routers, see Routing Matrix
with a TX Matrix Router FPC Numbering.
For information about extended port names in the Junos Fusion technology, see
Understanding Junos Fusion Ports .
Options interface interface-name—(Optional) Display the neighbor information about a particular
physical interface.
NOTE: Starting with Junos OS Release 14.2, you can also display LLDP
neighbor details for management interfaces, such as fxp or me, on MX
Series routers.
Required Privilege
Level
view
Related
Documentation
clear lldp neighbors on page 2728•
List of Sample Output show lldp neighbors on page 2739
show lldp neighbors interface ge-0/0/4 (Management Address is IPv4) on page 2739
show lldp neighbors interface ge-0/0/4 (Management Address is IPv6) on page 2740
show lldp neighbors (Management Ethernet Interfaces) on page 2741
Output Fields Table 170 on page 2736 describes the output fields for the show lldp neighbors command.
Output fields are listed in the approximate order in which they appear.
Table 170: show lldp neighbors Output Fields
Field DescriptionField Name
Information about remote devices.LLDP Remote
Devices Information
Copyright © 2017, Juniper Networks, Inc.2736
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
