show isis overview
Syntax show isis overview
<instance instance-name>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches and QFX
Series)
show isis overview
<instance instance-name>
Release Information Command introduced in Junos OS Release 8.5.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display IS-IS overview information.
Options none—Display standard overview information about IS-IS for all routing instances.
instance instance-name—(Optional) Display overview information for the specified
routing instance.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show isis overview on page 2700
Output Fields Table 159 on page 2698 lists the output fields for the show isis overview command. Output
fields are listed in the approximate order in which they appear.
Table 159: show isis overview Output Fields
Field DescriptionField Name
Name of the router.Hostname
Part of the ISO address of the routing device.Sysid
The area number of the routing device.Areaid
IS-IS routing instance.Instance
Router ID of the routing device.Router ID
Adjacency holddown capability: enabled or disabled.Adjacency holddown
Copyright © 2017, Juniper Networks, Inc.2698
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
