Juniper ACX2000 Configuration Guide

Table 159: show isis overview Output Fields (continued)
Field DescriptionField Name
Preference value of external routes.External route
preference
Number of prefixes allowed to be exported, as configured by the prefix-export-limit statement.Prefix export limit
Number of prefixes exported.Prefix export count
Wide area metrics capability is enabled.Wide area metrics are
enabled
Narrow metrics capability is enabled.Narrow metrics are
enabled
IS-IS adjacencies come up one after another when adjacency holddown is enabled.Adjacency holddown is
active
Sample Output
show isis overview
user@host> show isis overview
Instance: master
Router ID: 10.255.107.183
Hostname: pro-bng3-a
Sysid: 0192.0168.0001
Areaid: 49.0002
Adjacency holddown: enabled
Maximum Areas: 3
LSP life time: 1200
Filter low life time LSPs up to: 300
Attached bit evaluation: enabled
SPF delay: 200 msec, SPF holddown: 5000 msec, SPF rapid runs: 3
IPv4 is enabled, IPv6 is enabled
Micro-loop avoidance: Enabled
Method: Route Convergence Delay, Route convergence delay: 5000 msec
Traffic engineering: enabled
Restart: Disabled
Helper mode: Enabled
Level 1
Internal route preference: 15
External route preference: 160
Wide metrics are enabled, Narrow metrics are enabled
Adjacency holddown is active
Level 2
Internal route preference: 18
External route preference: 165
Prefix export limit: 5, Prefix export count: 5
Wide metrics are enabled
Adjacency holddown is active
user@host> show isis overview logical-system R2
Copyright © 2017, Juniper Networks, Inc.2700
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English