show route inactive-prefix
List of Syntax Syntax on page 3069
Syntax (EX Series Switches) on page 3069
Syntax show route inactive-prefix
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route inactive-prefix
<brief | detail | extensive | terse>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display inactive route destinations in each routing table.
Options none—Display all inactive route destination.
brief | detail | extensive | terse—(Optional) Display the specified level of output. If you
do not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show route inactive-prefix on page 3069
show route inactive-prefix detail on page 3070
show route inactive-prefix extensive on page 3070
show route inactive-prefix terse on page 3070
Output Fields For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
Sample Output
show route inactive-prefix
user@host> show route inactive-prefix
inet.0: 14 destinations, 14 routes (13 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
127.0.0.1/32 [Direct/0] 00:04:54
> via lo0.0
3069Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
