show route inactive-prefix detail
user@host> show route inactive-prefix detail
inet.0: 14 destinations, 14 routes (13 active, 0 holddown, 1 hidden)
127.0.0.1/32 (1 entry, 0 announced)
Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via lo0.0, selected
State: <Hidden Martian Int>
Age: 4:51
Task: IF
AS path: I00:04:54
> via lo0.0
show route inactive-prefix extensive
The output for the show route inactive-prefix extensive command is identical to that of
the show route inactive-path detail command. For sample output, see show route
inactive-prefix detail on page 3070.
show route inactive-prefix terse
user@host> show route inactive-prefix terse
inet.0: 18 destinations, 18 routes (17 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
127.0.0.1/32 D 0 >lo0.0
Copyright © 2017, Juniper Networks, Inc.3070
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
