Juniper ACX2000

source (Chassis Synchronization)
Syntax source {
(bits | gps) {
priority number;
quality-level (prc | prs |sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
request request (force-switch | lockout);
}
interfaces interface-name {
priority number;
quality-level (prc | prs |sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
request request (force-switch | lockout);
wait-to-restore minutes;
}
}
Hierarchy Level [edit chassis synchronization]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Description Configure a clock source used by the clock selection process.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
1721Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements