Juniper ACX2000

interface (Master Clock)
Syntax interface interface-name {
unicast-mode {
clock-client ip-address local-ip-address local-ip-address {
manual;
}
}
transport ipv4;
multicast-mode {
transport 802.3 ( link-local ) ;
asymmetry number;
}
}
Hierarchy Level [edit protocols ptp master]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
multicast-mode and transport ieee-802.3 (link-local) options introduced in Junos OS
Release 12.3X51 for the master interface.
Description Configure the IP address of the local Precision Time Protocol (PTP) master interface on
which to respond to downstream PTP slaves or clients.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
Copyright © 2017, Juniper Networks, Inc.1572
ACX Series Universal Access Router Configuration Guide