clear bridge mac-table
Syntax clear bridge mac-table
<bridge-domain (all | bridge-domain-name)>
<instance instance-name>
<interface interface-name>
<learning-vlan id (all-vlan | learning-vlan-id)>
<mac-address>
Release Information Command introduced in Junos OS Release 8.4.
Description (MX Series routers only) Clear learned Layer 2 address information from the media access
control (MAC) address table.
Options none—Clear all learned Layer 2 address information from the MAC address table.
bridge-domain (all | bridge-domain-name)—(Optional) Clear learned Layer 2 MAC
addresses for all bridging domains or for the specified bridging domain.
instance instance-name—(Optional) Clear learned Layer 2 MAC addresses for the
specified routing instance.
interface interface-name—(Optional) Clear learned Layer 2 MAC addresses for the
specified interface.
learning-vlan-id (all-vlan | learning-vlan-id)—(Optional) Clears learned Layer 2 MAC
addresses for all VLANs or for the specified VLAN.
mac-address—(Optional) Clear the specified learned Layer 2 address from the MAC
address table.
Required Privilege
Level
clear
List of Sample Output clear bridge mac-table on page 1786
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear bridge mac-table
user@host> clear bridge mac-table
Copyright © 2017, Juniper Networks, Inc.1786
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
