show (ospf | ospf3) interface
List of Syntax Syntax on page 2834
Syntax (EX Series Switches and QFX Series) on page 2834
Syntax show (ospf | ospf3) interface
<brief | detail | extensive>
<area area-id>
<interface-name>
<instance instance-name>
<logical-system (all | logical-system-name)>
<realm (ip4-multicast | ipv4-unicast | ipv6-multicast)>
Syntax (EX Series
Switches and QFX
Series)
show (ospf | ospf3) interface
<brief | detail | extensive>
<area area-id>
<interface-name>
<instance instance-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
area option introduced in Junos OS Release 9.2.
area option introduced in Junos OS Release 9.2 for EX Series switches.
realm option introduced in Junos OS Release 9.2.
Command introduced in Junos OS Release 11.3 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display the status of OSPF interfaces.
Options none—Display standard information about the status of all OSPF interfaces for all routing
instances
brief | detail | extensive—(Optional) Display the specified level of output.
area area-id—(Optional) Display information about the interfaces that belong to the
specified area.
interface-name—(Optional) Display information for the specified interface.
instance instance-name—(Optional) Display all OSPF interfaces under the named routing
instance.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)—(OSPFv3 only) (Optional)
Display information about the interfaces for the specified OSPFv3 realm, or address
family. Use the realm option to specify an address family for OSPFv3 other than IPv6
unicast, which is the default.
Copyright © 2017, Juniper Networks, Inc.2834
ACX Series Universal Access Router Configuration Guide