show isis hostname
List of Syntax Syntax on page 2691
Syntax (EX Series Switches and QFX Series) on page 2691
Syntax show isis hostname
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches and QFX
Series)
show isis hostname
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display IS-IS hostname database information.
This command displays the system ID-to-name cache. The output shows if the mapping
has been learned by receipt of a Hostname TLV #137 (type dynamic) configured in Junos
OS with the set system host-name command, or a static mapping defined in Junos OS
with the set system static-host-mapping hostname sysid command (type static). The
local router always has its type set to static even if static-host-mapping is not configured.
Options none—Display IS-IS hostname database information.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show isis hostname on page 2692
Output Fields Table 157 on page 2691 describes the output fields for the show isis hostname command.
Output fields are listed in the approximate order in which they appear.
Table 157: show isis hostname Output Fields
Field DescriptionField Name
System identifier mapped to the hostname.System Id
Hostname mapped to the system identifier.Hostname
2691Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
