show poe telemetries interface (ACX2000 Routers)
Syntax show poe telemetries interface interface-name (entries | all)
Release Information Command introduced in Junos OS Release 12.2 for ACX2000 Series Universal Access
Routers.
Description Display the history of power consumption on the specified interface.
Telemetries must be enabled on the interface before you can display the history of power
consumption.
Options interface interface-name—Display power consumption records for the specified PoE
interface.
(entries | all)—Specify the number of power consumption records to display. The most
recent records are displayed.
Required Privilege
Level
view
Related
Documentation
show poe interface•
• show poe controller on page 2893
• Troubleshooting PoE Interfaces
List of Sample Output show poe telemetries interface ge-0/1/7 all on page 2897
show poe telemetries interface ge-0/1/7 2 on page 2897
Output Fields Table 198 on page 2896 lists the output fields for the show poe telemetries interface
command. Output fields are listed in the approximate order in which they appear.
Table 198: show poe telemetries interface Output Fields
Field DescriptionField Name
Name of the interface.Interface
Number of the record for the specified interface. Record number 1 is the most
recent.
S1 No
Date and time when the power-consumption data was gathered.Timestamp
Amount of power provided by the specified interface at the time the data was
gathered.
Power
Maximum voltage provided by the specified interface at the time the data was
gathered.
Voltage
Copyright © 2017, Juniper Networks, Inc.2896
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
