unicast-mode (Master Clock)
Syntax unicast-mode {
clock-client ip-address local-ip-address local-ip-address {
manual;
}
}
Hierarchy Level [edit protocols ptp master interface interface-name]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure downstream Precision Time Protocol (PTP) clock slaves or clients to use
unicast transmission.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
Copyright © 2017, Juniper Networks, Inc.1768
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
