show interfaces (Link Services)
Syntax For Multilink Frame Relay user-to-user network-to-network interface (UNI NNI):
show interfaces interface-type :channel
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
For Multilink Frame Relay end-to-end:
show interfaces interface-type
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information Command introduced before Junos OS Release 7.4.
Description Display status information about the specified link services interface.
Options interface-type—On M Series and T Series routers, the interface type is ls-fpc/pic/port.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
channel—Channel number of the link services interface.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege
Level
view
List of Sample Output show interfaces extensive (MFR UNI NNI) on page 2594
show interfaces extensive (MFR End-to-End) on page 2596
Output Fields Table 149 on page 2587 lists the output fields for the show interfaces (link services)
command. Output fields are listed in the approximate order in which they appear.
Copyright © 2017, Juniper Networks, Inc.2586
ACX Series Universal Access Router Configuration Guide