Juniper ACX2000

cdvt
Syntax cdvt cdvt;
Hierarchy Level [edit firewall atm-policer atm-policer-name]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series routers.
Description (ACX Series routers) Define the Cell Delay/Variation Tolerance (CDVT) rate for the policer
or traffic control profile on an ATM IMA interface.
Options cdvt—CDVT rate in microseconds.
Range: 1 through 1,800,000,000
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Related
Documentation
• Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
• Configuring Policing on an ATM IMA Pseudowire on page 912
cell-bundle-size
Syntax cell-bundle-size cells;
Hierarchy Level [edit interfaces at-fpc/pic/port atm-options],
[edit interfaces at-fpc/pic/port unit logical-unit-number],
[edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number]
Release Information Statement introduced before Junos OS Release 7.4.
Description For ATM2 IQ interfaces using ATM Layer 2 circuit cell-relay transport mode only, configure
the maximum number of ATM cells per frame.
Options cells—Maximum number of cells.
Default: 1 cell
Range: 1 through 176 cells
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the Layer 2 Circuit Cell-Relay Cell Maximum Overview on page 189
1457Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements