classifiers (Physical Interface)
Syntax classifiers {
type (classifier-name | default) ;
}
Hierarchy Level [edit class-of-service interfaces interface-name ]
Release Information Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Description Apply a CoS aggregate behavior classifier to a physical interface. You can apply a default
classifier or one that is previously defined.
Options classifier-name—Name of the aggregate behavior classifier.
type—Traffic type.
Values: dscp, ieee-802.1, and inet-precedence
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• dscp on page 1496
• inet-precedence on page 1563
• ieee-802.1 on page 1554
clear
Syntax request protection-group ethernet-ring clear group-name <name>
Hierarchy Level [edit protocols protection-group ethernet-ring]
Description Clears all the active manual command on the ring-node. In the case of non-revertive
mode of operation, this command can also be used on RPL-owner to force the reversion,
otherwise the ring will stay in Pending state. When a group-name is specified, clear
operation is done only for the specified group otherwise clear operation is done for all
the configured ring-instances on the device.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Ethernet Automatic Protection Switching Overview
1461Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
