By default, statistics and frame counts are deleted for all MEPs attached to CFM-enabled
interfaces on the router. However, you can filter the scope of the command by specifying
an interface name.
Action To clear the on-demand ETH-SLM statistics and ETH-SLM frame counts for all MEPs
attached to CFM-enabled interfaces on the router:
•
user@host> clear oam ethernet connectivity-fault-management synthetic-loss-measurement
• To clear the on-demand ETH-SLM statistics and ETH-SLM frame counts only for MEPs
attached to the logical interface ge-0/5.9.0:
user@host> clear oam ethernet connectivity-fault-management synthetic-loss-measurement
ge-0/5/9.0
Clearing Iterator Statistics
Purpose Clear the existing iterator statistics and proactive ETH-SLM counters.
Multiple iterators can be associated with remote MEP. However, by default, only one
result pertaining to one iterator profile can be cleared.
Action To clear the iterator statistics for remote MEP 1 and iterator profile i1 with MEPs
belonging to the maintenance association ma1 within the maintenance domain
default-1:
•
user@host> clear oam ethernet connectivity-fault-management sla-iterator-statistics
sla-iterator i1 maintenance-domain default-1 maintenance-association ma1 local-mep 1
remote-mep 1
• To clear the iterator statistics for remote MEP 1 and iterator profile i2 with MEPs
belonging to the maintenance association ma1 within the maintenance domain default-1:
user@host> clear oam ethernet connectivity-fault-management sla-iterator-statistics
sla-iterator i2 maintenance-domain default-1 maintenance-association ma1 local-mep 1
remote-mep 1
Related
Documentation
clear oam ethernet connectivity-fault-management synthetic-loss-measurement on
page 1788
•
• show oam ethernet connectivity-fault-management synthetic-loss-statisticson page2807
• show oam ethernet connectivity-fault-management interfaces on
page 2768 (detail | extensive)
• show oam ethernet connectivity-fault-management mep-statistics on page 2779
• show oam ethernet connectivity-fault-management mep-database on page 2791
• Ethernet Interfaces Feature Guide for Routing Devices
Copyright © 2017, Juniper Networks, Inc.1152
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
