Default IEEE 802.1ad Classifier
Table 58 on page 957 shows the code point, forwarding class alias, and PLP that are
assigned to the IEEE 802.1ad bits when you apply the explicit default IEEE 802.1ad
classifier. The table is very similar to the IEEE 802.1p default table, but the loss priority is
determined by the drop eligibility indicator (DEI) bit. To apply the default table, include
the default statement at the [edit class-of-service interfaces interface-name classifiers
ieee-802.1] hierarchy level:
[edit class-of-service interfaces interface-name classifiers ieee-802.1ad]
default;
Table 58: Default IEEE 802.1ad Classifier
PLPForwarding Class AliasIEEE 802.1ad Code Point
lowbe0000
lowbe10010
lowef0100
lowef10110
lowaf111000
lowaf121010
lownc11100
lownc21110
highbe-dei0001
highbe1-dei0011
highef-dei0101
highef1-dei0111
highaf11-dei1001
highaf12-dei1011
highnc1-dei1101
highnc2-dei1111
957Copyright © 2017, Juniper Networks, Inc.
Chapter 28: Configuring Behavior Aggregate Classifiers
To Next Page
Loading...
Need help?
General
