clear dhcp relay statistics
Syntax clear dhcp relay statistics
<bulk-leasequery-connections>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
Syntax Syntax for EX Series switches:
show dhcp relay statistics
<routing-instance routing-instance-name>
Release Information Command introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 12.1 for EX Series switches.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Routers.
bulk-leasequery-connections option introduced in Junos OS Release 16.1.
Description Clear all Dynamic Host Configuration Protocol (DHCP) relay statistics.
Options bulk-leasequery-connections—(Optional) Clear bulk leasequery statistics.
logical-system logical-system-name—(On routers only) (Optional) Perform this operation
on the specified logical system. If you do not specify a logical system name, statistics
are cleared for the default logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance. If you do not specify a routing instance name, statistics
are cleared for the default routing instance.
Required Privilege
Level
view
Related
Documentation
show dhcp relay statistics on page 2451•
List of Sample Output clear dhcp relay statistics on page 1790
Output Fields Table 111 on page 1790 lists the output fields for the clear dhcp relay statistics command.
1789Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
