show chassis beacon
show chassis beacon
(QFX Series)
show chassis beacon
<cb slot-number>
<fpc slot-number>
<interconnect-device name (cb slot-number | fpc slot-number)>
<node-device name>
Release Information Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display the beacon LED status on a QFX3500, QFX3600, QFX5100, EX4600, OCX Series
standalone switch, Node device, and an Interconnect device. You can also display the
beacon LED status of the Control Boards and Flexible PIC Concentrators on the
Interconnect device.
Options cb slot-number— (QFabric systems only) (Optional) Display the status of the beacon
LEDs for the Control Board on the Interconnect device.
fpc slot-number — (QFabric systems only) (Optional) Display the status of the beacon
LEDs for the Flexible PIC Concentrator (FPC) on the Interconnect device. (Optional)
Display the status of the beacon LEDs for the Flexible PIC Concentrator on the
standalone switch.
interconnect-device name— (QFabric systems only) (Optional) Display the status of
the beacon LEDs for the Interconnect device.
node-device name— (QFabric systems only) (Optional) Display the status of the beacon
LEDs for the Node device.
Required Privilege
Level
view
Related
Documentation
request chassis beacon•
List of Sample Output show chassis beacon (QFX Series and OCX Series) on page 1864
show chassis beacon interconnect-device (QFabric System) on page 1864
show chassis beacon interconnect-device fpc (QFabric System) on page 1864
show chassis beacon node-device (QFabric System) on page 1864
show chassis beacon node-device fpc (QFabric System) on page 1864
Output Fields Table 119 on page 1864 lists the output fields for the show chassis beacon command. Output
fields are listed in the approximate order in which they appear.
1863Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
