To Next Page

To Previous Page

test-finish-wait-duration (RFC 2544 Benchmarking)

Syntax test-finish-wait-duration;

Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]

Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.

Description Number of seconds to wait after transmitting the last frame and before concluding that

the test as complete. Once the test is complete, the frames received after that are not

considered for the result computation. Use this parameter if the latency introduced by

the network under test is high in the normal conditions. Default value is 1 second.

Required Privilege

Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Documentation

• RFC 2544-Based Benchmarking Tests Overview on page 1335

• Configuring RFC 2544-Based Benchmarking Tests on page 1341

• rfc2544-benchmarking on page 1698

test-interface (RFC 2544 Benchmarking)

Syntax test-interface interface-name;

Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]

Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.

Description Specify the logical interface on which the RFC 2544-based benchmarking test is run.

This is a local user-to-network interface (UNI) on behalf of which the test frames are

generated when the test direction is egress.

Options interface-name—Name of the logical interface on which the test needs to be run.