mode (Interfaces)
Syntax mode loose;
Hierarchy Level [edit interfaces interface-name unit logical-unit-number family (inet | inet6) rpf-check],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family (inet | inet6) rpf-check]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 15.1F6 for PTX Series routers with
third-generations FPCs installed.
Description Check whether the packet has a source address with a corresponding prefix in the routing
table. If a corresponding prefix is not found, unicast reverse path forwarding (RPF) loose
mode does not accept the packet. Unlike strict mode, loose mode does not check whether
the interface expects to receive a packet with a specific source address prefix.
Default If you do not include this statement, unicast RPF is in strict mode.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Unicast RPF Strict Mode
Copyright © 2017, Juniper Networks, Inc.1620
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
