mode (RFC 2544 Benchmarking)
Syntax mode (initiate-and-terminate | reflect);
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the test mode for the packets that are sent during the benchmarking test.
Options initiate-and-terminate—Causes the test frames to be initiated at the router and the
reflected back frames to be terminated. This mode requires a reflector to be
configured at the peer end of the network to return back the generated frames.
reflect—Causes the received test frames to be reflected back on the configured service
(for example, bridge, inet, ccc).
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
1621Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
