Juniper ACX2000

pce-group (Protocols PCEP)
Syntax pce-group pce-group-id {
delegation-cleanup-timeout seconds;
max-unknown-messages messages-per-minute;
pce-type {
active stateful;
}
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag (all | pcep);
no-remote-trace;
}
}
Hierarchy Level [edit protocols pcep]
Release Information Statement introduced in Junos OS Release 12.3.
Support for PTX Series added in Junos OS Release 14.2.
Support for QFX10000 switches added in Junos OS Release 16.1R3.
Support for ACX Series added in Junos OS Release 17.1R1.
Description Configure the Path Computation Element (PCE) group parameters. A maximum of 10
PCE groups can be configured at any given point in time.
The remaining statements are explained separately.
NOTE: A PCE group can include PCEs that are either only stateful or only
active stateful. A combination of stateful PCEs and active stateful PCEs in
one PCE group is not supported.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• pcep on page 1657
1659Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements