show ppp summary
Syntax show ppp summary
Release Information Command introduced in Junos OS Release 7.5.
Description Display PPP session summary information.
Options This command has no options.
Required Privilege
Level
view
List of Sample Output show ppp summary on page 2907
Output Fields Table 200 on page 2907 lists the output fields for the show ppp summary command. Output
fields are listed in the approximate order in which they appear.
Table 200: show ppp summary Output Fields
Field DescriptionField Name
Interface on which the PPP session is running. An interface type of
pp0 indicates an Ethernet interface type on a M120 or M320 router.
Interface
Type of session: PPP or Cisco-HDLC.Session type
PPP process phases: Authenticate, Pending, Establish, Network,
Disabled.
Session phase
Special conditions present in the session, such as Bundled, TCC,
No-keepalives, Looped, Monitored, and NCP-only.
Session flags
Sample Output
show ppp summary
user@host> show ppp summary
Interface Session type Session phase Session flags
at-4/0/0.456 PPP Network
lsq-0/3/0.0 PPP Disabled
lsq-1/0/0.0 PPP Disabled
rlsq0.0 PPP Network NCP-only
so-1/0/0.0 PPP Authenticate
so-1/0/1.0 PPP Disabled Looped
so-2/0/0.0 Cisco-HDLC Establish
so-4/0/0.0 PPP Establish Monitored
t1-1/3/0:1.0 PPP Network Bundled
t1-1/3/0:2.0 PPP Network Bundled
pp0.12 PPP Network
2907Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
