Juniper ACX2000

dscp-code-points (RFC 2544 Benchmarking)
Syntax dscp-code-points dscp-bits;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the value of the Differentiated Services (DiffServ) field within the IP header of
the test frames. The DiffServ code point (DSCP) bits value must be set to a valid 6-bit
pattern. If you do not specify this value, 0 is used in the DSCP fields in the IP header.
Options dscp-bits—A valid 6-bit pattern; for example, 001111, or one of the following configured
DSCP aliases:
• af11—Default: 001010
• af12—Default: 001100
• af13—Default: 001110
• af21—Default: 010010
• af22—Default: 010100
• af23 —Default: 010110
• af31 —Default: 011010
• af32 —Default: 011100
• af33 —Default: 011110
• af41 —Default: 100010
• af42 —Default:100100
• af43 —Default:100110
• be—Default: 000000
• cs1—Default: 001000
• cs2—Default: 010000
• cs3—Default: 011000
• cs4—Default: 100000
• cs5—Default: 101000
• cs6—Default: 110000
• cs7—Default: 111000
• ef—Default: 101110
• nc1—Default: 110000
Copyright © 2017, Juniper Networks, Inc.1498
ACX Series Universal Access Router Configuration Guide