• default—For the default route to the destination. This is equivalent to specifying an IP
address of 0.0.0.0/0.
• destination-prefix/prefix-length—/destination-prefix is the network portion of the IP
address, and prefix-length is the destination prefix length.
The policy statement is explained separately.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
gigether-options (ACX Series)
Syntax gigether-options {
(asynchronous-notification | no-asynchronous-notification);
(auto-negotiation | no-auto-negotiation) remote-fault <local-interface-online |
local-interface-offline>;
(flow-control | no-flow-control);
ignore-l3-incompletes;
(loopback | no-loopback);
mpls {
pop-all-labels {
required-depth number;
}
}
no-auto-mdix
ethernet-switch-profile {
tag-protocol-id [ tpids ];
}
}
Hierarchy Level [edit interfaces interface-name]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Description Configure Gigabit Ethernet specific interface properties.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Ethernet Interfaces Overview
Copyright © 2017, Juniper Networks, Inc.1536
ACX Series Universal Access Router Configuration Guide