[edit services rpm rfc2544-benchmarking profiles test-profile profile1]
user@host# set test-type latency
•
To configure a frame-loss test, use the frame-loss option with the test-type
statement.
[edit services rpm rfc2544-benchmarking profiles test-profile profile1]
user@host# set test-type frame-loss
•
To configure a back-to-back frames test, use the back-back-frames option with the
test-type statement.
[edit services rpm rfc2544-benchmarking profiles test-profile profile1]
user@host# set test-type back-back-frames
Configuring a Test Name for an RFC 2544-Based Benchmarking Test
You can configure a test name by including the test-name test-name statement at the
[edit services rpm rfc2544-benchmarking] hierarchy level.
To configure a test name and define its attributes for initiator:
1. In configuration mode, go to the [edit services] hierarchy level.
[edit]
user@host# edit services
2. Configure an RPM service instance.
[edit services]
user@host# edit rpm
3. Configure an RFC 2544-based benchmarking test for the RPM instance.
[edit services rpm]
user@host# edit rfc2544-benchmarking
4. Define a name for the test—for example, test1. The test name identifier can be up to
32 characters in length.
[edit services rpm rfc2544-benchmarking]
user@host# edit tests test-name test1
5. Configure the destination IPv4 address for the test packets. This parameter is required
only if you configure an IPv4 family inet. This option is not required if you specify circuit
cross-connect (CCC) as the family. If you do not configure the destination IPv4 address,
the default value of 192.168.1.20 is used.
[edit services rpm rfc2544-benchmarking tests test-name test1]
user@host# set destination-ipv4-address address
6. Specify the source MAC address used in generated test frames. This parameter is
effective for a CCC family and it is not applicable for an inet family. If you specify this
parameter for an inet family, a commit error occurs when you commit the configuration.
Copyright © 2017, Juniper Networks, Inc.1348
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
