show protection-group ethernet-ring aps
Syntax show protection-group ethernet-ring aps
Release Information Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Description Display the status of the Automatic Protection Switching (APS) and Ring APS (RAPS)
messages on an Ethernet ring.
Options This command has no options.
Required Privilege
Level
view
Related
Documentation
show protection-group ethernet-ring data-channel•
• show protection-group ethernet-ring interface on page 2920
• show protection-group ethernet-ring node-state on page 2923
• show protection-group ethernet-ring statistics on page 2927
• show protection-group ethernet-ring vlan on page 2932
List of Sample Output show protection-group ethernet-ring aps (EX Switches) on page 2917
show protection-group ethernet-ring aps (Owner Node, Normal Operation on ACX
and MX Routers) on page 2917
show protection-group ethernet-ring aps detail (Owner Node, Normal Operation on
ACX and MX Routers) on page 2918
show protection-group ethernet-ring aps (MX RPL Owner Ring Node, Failure condition
on non-RPL link of the ring) on page 2918
show protection-group ethernet-ring aps (MX Interconnection Ring Node, Failure
condition in major ring on non-RPL link of the ring) on page 2918
show protection-group ethernet-ring aps (MX Series router) on page 2918
show protection-group ethernet-ring aps detail (MX Series router) on page 2918
show protection-group ethernet-ring aps (MX Interconnection Ring Node as RPL owner
of major ring, rings in IDLE state) on page 2919
Output Fields Table 202 on page 2916 lists the output fields for the show protection-group ethernet-ring
aps command. Output fields are listed in the approximate order in which they appear.
Table 202: show protection-group ethernet-ring aps Output Fields
Field DescriptionField Name
Name configured for the Ethernet ring.Ethernet Ring
Copyright © 2017, Juniper Networks, Inc.2916
ACX Series Universal Access Router Configuration Guide