Juniper ACX2000 Configuration Guide

ML link settings 68 0 0 0
IPCP blocked address 68 0 0 0
PPP session trace 76 0 0 0
IFL redundancy state 76 0 0 0
Protocol family 84 0 0 65535 0 0
ML bundle settings 108 0 0 0
PPP LCP session 120 0 0 0
PPP NCP session 124 0 0 0
Physical interface 124 170 0 65535 21080 170
Access profile 132 0 0 0
ML wait entry 144 0 0 20 0 0
Group profile 164 0 0 0
Profile client 272 0 0 0
PPP Auth session 356 0 0 0
Logical interface 524 0 0 65535 0 0
Non-tagged 8 2
Total 21088 172 0
Session statistics from PPP universal edge process
Total subscriber sessions: 32
Subscriber sessions in disabled phase : 32
Subscriber sessions in establish phase : 0
Subscriber sessions in authenticate phase: 0
Subscriber sessions in network phase : 0
Type Size Active Free Limit Total size Requests Failures
authenticate 224 1 99 16384 224 0 0
linkInterface 152 1 99 16384 152 0 0
pap 256 1 99 16384 256 0 0
lcp 272 1 99 16384 272 0 0
chap 284 0 0 16384 0 0 0
eapBuffer 1464 0 0 16384 0 0 0
eap 276 0 0 16384 0 0 0
authNone
networkInterface 220 1 99 16384 220 0 0
ipNcp 256 1 99 16384 256 0 0
ipv6Ncp 204 0 0 16384 0 0 0
osiNcp 192 0 0 16384 0 0 0
mplsNcp 188 0 0 16384 0 0 0
trace 2052 0 16 16 0 0 0
Total 1380 0 0
show ppp statistics recovery (Safe to Restart)
user@host> show ppp statistics recovery
Recovery statistics from PPP universal edge process
Recovery state: recovery done
Subscriber sessions recovered OK : 32001
Subscriber sessions recovery failed : 0
show ppp statistics recovery (Unsafe to Restart)
user@host> show ppp statistics recovery
Recovery statistics from PPP universal edge process
Recovery state: recovery cleanup pending
Subscriber sessions pending retention : 32001
Subscriber sessions recovered OK : 0
Subscriber sessions recovery failed : 0
2915Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English