output (Chassis Alarm Relay)
Syntax output{
port port-number {
input-relay input-relay;
mode (close | open);
temperature;
}
}
Hierarchy Level [edit chassis alarm relay]
Release Information Statement introduced in Junos OS Release 12.3.
Description Configure output relay alarms.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• User-Defined Alarm Relay Overview on page 158
• show chassis craft-interface on page 1865
• show chassis alarms on page 1845
outer-tag-protocol-id (RFC 2544 Benchmarking)
Syntax outer-tag-protocol-id;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description TPID to be used in the outer VLAN tag. Supported values are 0x8100, 0x88a8, 0x9100,
0x9200
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
Copyright © 2017, Juniper Networks, Inc.1646
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
