Juniper ACX2000 Configuration Guide

interface (PTP Slave)
Syntax interface interface-name {
unicast-mode {
clock-source ip-address {
local-ip-address local-ip-address;
asymmetry number;
}
}
transport ipv4;
}
}
Hierarchy Level [edit protocols ptp slave]
Description The interface on which to respond to the upstream PTP master.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
• Precision Time Protocol Overview
1573Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English