show chassis synchronization
List of Syntax Syntax on page 2386
Syntax (on ACX500 Series) on page 2386
Syntax show chassis synchronization
<clock-module <(re0 | re1 | routing-engine (backup | both | local | master | other))>>
<extensive>
<backup | master>
<interface interface-name>
Syntax (on ACX500
Series)
show chassis synchronization
<gnss>
<extensive>
<backup | master>
Release Information Command introduced in Junos OS Release 7.6 for M320 routers.
Command introduced in Junos OS Release 8.3 for M40e routers.
Command introduced in Junos OS Release 9.3 for M120 routers.
Command introduced in Junos OS Release 10.2 for T320, T640, and T1600 routers.
Command introduced in Junos OS Release 12.1 for PTX Series Packet Transport Routers.
Command introduced in Junos OS Release 12.2 for ACX Series routers.
Command introduced in Junos OS Release 12.3X54–D20 for ACX500 Series routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Description (ACX Series, M320, M40e,M120, T320, T640, and T1600 routers and PTX Series Packet
Transport Routers only) Display information about the external clock source currently
used for chassis synchronization.
Options clock-module—Display clock module information. You can optionally specify one of
these Routing Engine qualifiers:
re0—Routing Engine 0
re1—Routing Engine 1
routing-engine (backup | both | local | master | other)—Routing Engine type
extensive—(Optional) Display clock synchronization information in detail.
interface interface-name—(Optional) Display clock synchronization information for the
specified interface.
backup—(Optional) Display clock synchronization information about the backup clock.
master— (Optional) Display clock synchronization information about the master clock.
Required Privilege
Level
maintenance
Copyright © 2017, Juniper Networks, Inc.2386
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
