Table 181: show oam ethernet connectivity-fault-management sla-iterator-statistics Output
Fields
Output Field DescriptionOutput Field Name
Name of the maintenance domain.Maintenance domain
Level of the maintenance domain level configured.Level
Name of the maintenance association.Maintenance association
Numeric identifier of the local MEP.Local MEP id
Numeric identifier of the remote MEP.Remote MEP id
Unicast MAC address of the remote MEP.Remote MAC address
Name of iterator.Iterator name
Numeric identifier of the iterator.Iterator Id
Number of cycles (in milliseconds) taken between back-to-back transmission of SLA frames for
this connection
Iterator cycle time
Maximum number of cycles per iterationIteration period
Current status of iterator whether running or stopped.Iterator status
Status of iteration as infinite or finite.Infinite iterations
Date and time when the counter was reset.Counter reset time
Reason to reset counter.Reset reason
Calculation weight of delay.Delay weight
Calculation weight of delay variation.Delay variation weight
Delay measurement message (DMM) PDU frames sent to the peer MEP in this session.DMM sent
Number of DMM frames sent to the peer MEP in this session skipped during threshold hit.DMM skipped for threshold
hit
Number of DMM frames sent to the peer MEP in this session skipped during the last threshold hit
window.
DMM skipped for threshold
hit window
Number of delay measurement reply (DMR) frames received.DMR received
Total number of DMR out of sequence packets received.DMR out of sequence
2803Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
