clock-client (Master Clock)
Syntax clock-client ip-address local-ip-address local-ip-address {
manual;
}
Hierarchy Level [edit protocols ptp master interface interface-name unicast-mode]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Description Configure the IP address or subnet of the remote PTP host and the local PTP master
interface. This statement enables you to specify the following information:
• The exact IP address of a PTP host
• A subnet mask instead of the exact IP address of each host. The ACX Series router
acting as the master boundary clock processes unicast negotiation requests from any
host—within the subnet—which sends unicast negotiation requests. The maximum
number of clock clients is 512.
NOTE: You can configure the maximum number of clients (512 ) in the
following combination:
• Automatic clients 256.
• Manual and secure clients 256—Any combination of manual and secure
clients is allowed as long as the combined total amounts to 256.
Options ip-address—IP address or subnet of the remote PTP host.
local-ip-address—IP address of the local PTP master interface.
The remaining statement is explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 PTP Boundary Clock Overview on page 234
• Configuring Precision Time Protocol Clocking on page 243
• Configuring a PTP Master Boundary Clock on page 244
• Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
• Example: Configuring a PTP Boundary Clock on page 248
Copyright © 2017, Juniper Networks, Inc.1464
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
