destination-ipv4-address (RFC 2544 Benchmarking)
Syntax destination-ipv4-address address;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the destination IPv4 address to be used in generated test frames. This is optional
for the family bridge.
Options address—Valid IPv4 address.
Default: If you do not configure the destination IPv4 address, the default value of
192.168.1.20 is used.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
Copyright © 2017, Juniper Networks, Inc.1480
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
