show system storage partitions (ACX Series)
Syntax show system storage partitions
Release Information Command introduced in Junos OS Release 16.1R2 for ACX Series routers.
Description Display information about the disk partitions on ACX Series routers.
Required Privilege
Level
view
Related
Documentation
Routing Engines and Storage Media Names (ACX Series, M Series, MX Series, PTX
Series, T Series, TX Matrix, TX Matrix Plus, and JCS 1200 Routers) on page 45
•
• Boot Sequence on ACX Series Routers on page 48
• Dual-Root Partitioning ACX Series Routers Overview on page 48
• Understanding How the Primary Junos OS Image with Dual-Root Partitioning Recovers
on the ACX Series Router on page 49
• Junos OS Release 12.2 or Later Upgrades with Dual-Root Partitioning on ACX Series
Routers on page 51
• Installing Junos OS Using a USB Storage Device on ACX Series Routers on page 52
• Installing Junos OS Upgrades from a Remote Server on ACX Series Routers on page 52
• Example: Installing Junos OS and Configuring a Dual-Root Partition on ACX Series
Routers Using the CLI on page 53
List of Sample Output show system storage partitions on page 3181
Output Fields Table 234 on page 3180 describes the output fields for the show system storage partitions
command. Output fields are listed in the approximate order in which they appear.
Table 234: show system storage partitions Output Fields
Field DescriptionField Name
Media (internal or external) from which the switch was booted.Boot Media
Name of the active root partition.Active Partition
Name of the backup (alternate) root partition.Backup Partition
Partition from which the switch was last booted.Currently booted from
Copyright © 2017, Juniper Networks, Inc.3180
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
