Juniper ACX2000

Table 233: show system autoinstallation status Output Fields
Field DescriptionField Name
Display autoinstallation status information:
• Last committed file—File last committed for autoinstallation configuration.
• Configuration server of last committed file—IP address or URL of the server configured to retrieve
configuration information for the last committed configuration file.
• Interface—Interface configured for autoinstallation.
• Name—Name of the interface.
• State—Interface state.
• Address acquisition—Display IP address acquired and protocol used for acquisition upon startup.
• Protocol—Protocol used for acquisition: BOOTP/DHCP or RARP.
• Acquired address—IP address acquired from the DHCP server.
Autoinstallation status
Sample Output
show system autoinstallation status
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.0.0.0
Interface:
Name: ge-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
3179Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands