show interfaces (Fast Ethernet)
Syntax show interfaces interface-type
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Release Information Command introduced before Junos OS Release 7.4.
Description Display status information about the specified Fast Ethernet interface.
Options interface-type—On M Series and T Series routers, the interface type is fe-fpc/pic/port.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
Required Privilege
Level
view
List of Sample Output show interfaces (Fast Ethernet) on page 2662
show interfaces brief (Fast Ethernet) on page 2663
show interfaces detail (Fast Ethernet) on page 2663
show interfaces extensive (Fast Ethernet) on page 2663
Output Fields Table 154 on page 2649 lists the output fields for the show interfaces (Fast Ethernet)
command. Output fields are listed in the approximate order in which they appear.
Table 154: show interfaces Fast Ethernet Output Fields
Level of OutputField DescriptionField Name
Physical Interface
All levelsName of the physical interface.Physical interface
All levelsState of the interface. Possible values are described in the “Enabled Field”
section under Common Output Fields Description.
Enabled
detail extensive noneIndex number of the physical interface, which reflects its initialization sequence.Interface index
detail extensive noneSNMP index number for the physical interface.SNMP ifIndex
2649Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
