oam-liveness
Syntax oam-liveness {
down-count cells;
up-count cells;
}
Hierarchy Level [edit interfaces interface-name atm-options vpi vpi-identifier],
[edit interfaces interface-name unit logical-unit-number],
[edit interfaces interface-name unit logical-unit-number family family address address
multipoint-destination address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family address address multipoint-destination address]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Description For ATM encapsulation only, configure Operation, Administration, and Maintenance
(OAM) F5 loopback cell count thresholds. Not supported on ATM-over-SHDSL interfaces.
For ATM2 IQ PICs only, configure OAM F4 loopback cell count thresholds at the [edit
interfaces interface-name atm-options vpi vpi-identifier] hierarchy level.
Options down-count cells—Minimum number of consecutive OAM F4 or F5 loopback cells lost
before a VC is declared down.
Range: 1 through 255
Default: 5 cells
up-count cells—Minimum number of consecutive OAM F4 or F5 loopback cells received
before a VC is declared up.
Range: 1 through 255
Default: 5 cells
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the ATM OAM F5 Loopback Cell Threshold on page 188
1643Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
