bpdu-block-on-edge
Syntax bpdu-block-on-edge;
Hierarchy Level [edit logical-systems logical-system-name protocols (mstp | rstp | vstp)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(mstp | rstp | vstp)],
[edit protocols ( mstp | rstp| vstp )],
[edit routing-instances routing-instance-name protocols (mstp | rstp | vstp)]
Release Information Statement introduced in Junos OS Release 9.4.
Support for logical systems added in Junos OS Release 9.6.
Statement introduced in Junos OS Release 17.1 for ACX Series routers.
Description Enable BPDU blocking on the edge ports of a virtual switch.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Understanding BPDU Protection for Spanning-Tree Instance Interfaces on page 423
• BPDU Protection on All Edge Ports of the Bridge
• Configuring BPDU Protection on All Edge Ports on page 425
• Configuring BPDU Protection on Spanning Tree Interfaces
• rstp
• mstp
• vstp
1451Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
