Juniper ACX2000

show oam ethernet connectivity-fault-management synthetic-loss-statistics
Syntax show oam ethernet connectivity-fault-management synthetic-loss-statistics
<local-mep local-mep-id>
maintenance-association ma-name
<count entry-count>
maintenance-domain md-name
<remote-mep remote-mep-id>
Release Information Command introduced in Junos OS Release 13.2 for MX Series routers.
Description On MX Series routers with Modular Port Concentrators (MPCs) with Ethernet interfaces,
display the on-demand ETH-SLM statistics.
Options count entry-count—(Optional) Number of entries to display from the statistics table. The
range of values is from 1 through 100. The default value is 100.
local-mep local-mep-id—(Optional) Numeric identifier of the local MEP. The range of
values is from 1 through 8192.
maintenance-association ma-name—Name of an existing CFM maintenance association.
maintenance-domain md-name—Name of an existing connectivity fault management
(CFM) maintenance domain.
remote-mep remote-mep-id—(Optional) Numeric identifier of the remote MEP. The range
of values is from 1 through 8192.
Required Privilege
Level
view
Related
Documentation
clear oam ethernet connectivity-fault-management statistics•
• clear oam ethernet connectivity-fault-management synthetic-loss-measurement
on page 1788
• show oam ethernet connectivity-fault-management interfaces on page 2768
• show oam ethernet connectivity-fault-management mep-database on page 2791
• show oam ethernet connectivity-fault-management mep-statistics on page 2779
List of Sample Output show oam ethernet connectivity-fault-management
synthetic-loss-statistics on page 2808
Output Fields Table 182 on page 2808 lists the output fields for the show oam ethernet
connectivity-fault-management synthetic-loss-statistics command. Output fields are
listed in the approximate order in which they appear.
2807Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands