show ppp interface
Syntax show ppp interface interface-name
<extensive| terse>
Release Information Command introduced in Junos OS Release 7.5.
Description Display information about PPP interfaces.
Options interface-name—Name of a logical interface.
extensive | terse—(Optional) Display the specified level of output.
Required Privilege
Level
view
List of Sample Output show ppp interface on page 2906
show ppp interface extensive on page 2906
show ppp interface terse on page 2906
Output Fields Table 199 on page 2898 lists the output fields for the show ppp interface command. Output
fields are listed in the approximate order in which they appear.
Table 199: show ppp interface Output Fields
Level of
OutputField DescriptionField Name
All levelsName of the logical interface on which the session is running.Session
All levelsSession type: PPP.Type
All levelsPPP process phase: Authenticate, Pending, Establish, LCP, Network, Disabled, and Tunneled.Phase
All levelsSpecial conditions present in the session: Bundled, TCC, No-keepalives, Looped, Monitored,
and NCP-only.
Session flags
None
specified
Protocol state information. See specific protocol state fields for information.protocol State
None
specified
Challenge-Handshake Authentication Protocol (CHAP) authentication state information or
Password Authentication Protocol (PAP) state information. See the Authentication field
description for further information.
AUTHENTICATION
Copyright © 2017, Juniper Networks, Inc.2898
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
