Juniper ACX2000

metric (Aggregate, Generated, or Static Route)
Syntax (metric | metric2 | metric3 | metric4) metric <type type>;
Hierarchy Level [edit logical-systems logical-system-name routing-options (aggregate | generate | static)
(defaults | route)],
[edit routing-options (aggregate | generate | static) (defaults | route)]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Specify the metric value for an aggregate, generated, or static route. You can specify up
to four metric values, starting with metric (for the first metric value) and continuing with
metric2, metric3, and metric4.
Options metric—Metric value.
Range: 0 through 4,294,967,295 (2
32
– 1)
type type—(Optional) Type of route.
When routes are exported to OSPF, type 1 routes are advertised in type 1 externals, and
routes of any other type are advertised in type 2 externals. Note that if a
qualified-next-hop metric value is configured, this value overrides the route metric.
Range: 1 through 16
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• aggregate on page 1420
• generate on page 1535
• static
• Example: Summarizing Static Routes Through Route Aggregation
• Understanding Route Aggregation
Copyright © 2017, Juniper Networks, Inc.1612
ACX Series Universal Access Router Configuration Guide